Sanes Presses Co., Ltd.

Totally realize the high accuracy, high stiffness, low noise requirements for die hot forging

New design moves die forging towards high
precision operation.

New directives targeting high stiffness
structure and wide-range eccentric loading.

Virtually nil gap variation of diagonal X-type
guide rails.

High quality machine accuracy improving
   machine endurance, providing lasting value.
   Totally matching the requirements of
   contemporary high accuracy manufacturing
   industry-an attractive and highly effcient
   model.

Frame

The frame is designed with box-type structure, for its high rigidity and low deformation for high accuracy. The structure along with all its rigorously calculated key components and run through computer aided analysis for their load distribution, and inspected thoroughly after welding. This approach thus minimizes deformation, maximizes the accuracy of the product, and extends the service time of dies and die shoe to their limits, reduces the vibration during operation.

Crank shaft

high precision and high rigidity crank shaft, made of Chromo-Molybdenum(Cr-Mo) alloy steel, shaped by hot forging, heat treated, tempering, quality tuning and surface hardening etc., and precision turning and grinding, reduces wear, extends its service life time.

Slide And Slide Gap

With unique diagonal X-type heat expansion compensation design of the slide and its guide rails, the lateral gap variation reduces down to virtually nil during hot forging, ensuring the quality of forging products and extends dies service time.

shf-8.jpg (90120 個位元組)

High Torque, Low Inertial Separate Type Clutch/Brake

Clutch/Brake designed especially for high frequency intermittent cycle and heavy load press operation. High torque, smooth start-up, fast coupling. Unique brake designed to be fast heat dissipation and low noise. Non asbestos linings. abrasion resistant, easy maintenance, more environment protection conscious.

Features of SHF

Forced automatic lubrication system driving the oil to all the required spots,
with collector gathering used oil, filtering, then recycling.

Temperature inspector installed on the bearing of crank shaft, ensuring proper
   performance of the entire machine and bearing parts, to extend the service
   time.

Load analyzer displays the exertion force of every stroke, press machine will
stop automatically if pressure is overload, thus to extend the service time of
forging dies and press.

Safety control circuit, comply completely with Western industry standards, for
safe operation.

Attachments

1. Press Control Double Valves	5. Electrical Slide Adjust Device
2. Auto-Lubricate Device	6. Die Stick Release Device
3. Load Analyzer	7. Power Inspector Device
4. Crank Temperature Inspector	8. Pre-Set Electron Counter

Specification of SHF series

shf-11.jpg (348064 個位元組)

Model		SHF-400	SHF-600	SHF-1000	SHF-1600	SHF-2000
Capacity	ton	400	600	1000	1600	2000
Stroke length	mm	180	200	220	250	280
Slide adjustment	mm	30	10	10	10	10
Die height, silde to bolster	mm	550	650	750	850	900
Slide area	mm	500x500	660x580	760x760	1030x1000	1100x1100
Bolster area	mm	700x720	800x860	1100x1150	1150x1200	1250x1300
Stroke per min (Continuous)	SPM	95	90	85	80	75
Stroke per min (Intermitten)	SPM	20	18	18	16	16
Main motor	HPxP	30	60	75	100	150
Required air pressure	kg/c㎡	5	5	5	5	5
Press overall width	mm	2350	3150	3500	3700	4355
Press overall height	mm	4200	4450	4800	6190	7230
Press overall length	mm	2250	2500	2600	3450	3310
Press down width	mm	1690	2180	2790	3190	3650