std200

Double Crank Power Presses

STD Series

Change Traditional C Type Frame Into Straight Side Frame

  • High rigidity frame structure eliminating the opening distortion, fully realizing the highly efficient blanking and deep drawing operation.
  • Eight long right angled slide guide rails provide confidence on installing high accurate die. Ensuring high accuracy manufacturing to be possible.
  • Improved back side operability and die conformability of the presses.
  • Large side opening for simple installation to complete single and fully automated operation on coiled material.
  • High quality machine accuracy improving machine endurance, providing lasting value.
    High quality machine accuracy improving machine endurance, providing lasting value.

Feature

gear-drive-spindle
Change Traditional C Type Frame Into Straight Side Frame

High rigidity frame structure eliminating the opening distortion, fully realizing the highly efficient blanking and deepdrawing operation.

Eight long right angled slide guide rails provide confidence on installing high accurate die. Ensuring high accuracy manufacturing to be possible.

Large side opening for simple installation to complete single and fully automated operation on coiled material.

 

Highly Reliable Over-Load Protector Device

Inside the slide, there is one precise hydraulic cylinder, As soon as larger load or eccentric load occurs, the pressure of oil cylinder will be released. the clutch of press will stop the slide and complete the protection of press and dies. When over-load situation ends, move the slide to top dead center by inch operation mode, the hydraulic pump will automatically make up the hydraulic pressure to the original set point. To eliminate stick situation, just release the hydraulic pressure inside the oil cylinder.

1. Piston

2. Hydraulic Cylinder

3. H.O.L.P Device

4. Oil Tank

5. Air Regulation Unit

gear-drive-spindle

SPECIFICATIONS

Model Unit STD-160 STD-200 STD-250 STD-300
Capacity Ton 160 200 250 300
Tonnage Rating Point (About B.D.C) mm 6 7 7 7
Stroke Length Short type mm 130 150 170 180
Long type mm 200 250 280 300
Stroke Per Minute Short type S.P.M 40-80 35-75 25-55 20-45
Long type S.P.M 30-55 25-50 20-35 20-35
Die Height mm 400 450 450 450
Slide Adjustment mm 90 100 120 120
Slide Area mm 1500x580 1850x650 2100x700 2200x800
Bolster Area mm 1800x760 2150x840 2200x920 2300x1000
Main Motor HPxP 20HP(INV) 25HP(INV) 30HP(INV) 40HP(INV)
Required Pressure kg/cm2 5 5 5 5
-Due to continuous research and development, the machine design and specifications are subject to change without prior notice.
-Custom specifications are available upon request.
Model Unit STD-400 STD-500 STD-600
Capacity Ton 400 500 600
Tonnage Rating Point (About B.D.C) mm 7 7 7
Stroke Length Short type mm 200 200 200
Long type mm 350 400 400
Stroke Per Minute Short type S.P.M 25-45 20-45 20-45
Long type mm 20-35 20-35 20-35
Die Height mm 450 550 550
Slide Adjustment mm 120 150 150
Slide Area mm 2300x800 2800x1000 3000x1200
Bolster Area mm 2400x1000 2800x1200 3000x1400
Main Motor HPxP 60HP(INV) 75HP(INV) 75HP(INV)
Required Pressure kg/cm2 5 5 5
-Due to continuous research and development, the machine design and specifications are subject to change without prior notice.
-Custom specifications are available upon request.

Need Inquire ?

If you need more information or quotation about this product, Our sales representative will reply as soon as possible